Lincoln U2688-2 "Factory Reconditioned" 140T Mig Welder
Get A Free 1740 Helmet With Purchase Of This Machine For A Limited Time
*While Supplies Last*
Lincoln U2688-2 "Factory Reconditioned" 140T Mig Welder
The Factory-Reconditioned Lincoln Electric U2688-2 SP-140T MIG Welder can weld with either solid MIG wire or flux-cored wire for a range and has a 30 to 140 amp DC output for a range of projects. The wire feed supports flux-cored welding on 18 gauge to 3/16" thick steel and solid MIG welding on 24 gauge to 10 gauge steel. It has a precision wire feed system that reduces the chance of wire tangling and crushing. A brass-to-brass gun connection provides enhanced conductivity. The circuit board is sealed for protection from the environment and sits in a rigid plastic tray for shock resistance. The welder has a 20% duty cycle at 90 amps that allows it to run 2 minutes out of each 10-minute period without overheating. It welder comes with a welding gun and cable, flux-cored wire, solid MIG wire, gasless nozzle, gas nozzle, gas regulator and hose, adapter, contact tips, drive rolls, and instructional DVD.
Welding output, DC 30-140 amp
Duty cycle 20% at 90 amp
Input power 120V, 60 Hz, 1 phase
Dimensions 13.65" H x 10.38" W x 18.16" D
Weight 54 lb.
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Welders join two or more pieces of metal to form one solid piece by simultaneously applying heat to soften them and applying pressure to connect them. Stick welders, also known as arc welders, use an electrified arc that flows between a welding stick and the metal to join the pieces. Wire-fed welders use an electrified wire spool that is fed at a constant speed between the pieces of metal to join them.
Lincoln Electric manufactures welders and welding supplies, including the Century brand. The company, founded in 1895, is headquartered in Cleveland, OH.
What's in the Box?
(1) Factory-Reconditioned Lincoln Electric U2688-2 SP-140T MIG Welder with Magnum PRO 100L welding gun and 10' cable
(1) gas nozzle
(1) gasless nozzle
(1) gas diffuser
(1) cable liner
(3) 0.025" contact tips
(3) 0.035" contact tips
(1) work cable and clamp
(1) adjustable gas regulator and hose
(1) spindle adapter
(1) 1 lb. spool of 0.025" (0.6 mm) SuperArc L-56 Mild Steel MIG wire
(1) 1 lb. spool of 0.035" (0.9 mm) Innershield NR-211-MP flux-cored wire
(1) 0.025" (0.6 mm) drive roll
(1) 0.025"-0.030"(0.6 - 0.7 mm) drive roll
(1) 0.030"-0.045" (0.7 - 1.1 mm) knurled drive roll
(1) 0.025"-0.035" (0.6 - 0.9 mm) wire guide
(1) 0.035"-0.045" (0.9 - 1.1 mm) wire guide
(1) Instructional DVD
You Might Like
Get More From Your Gear With Lincoln Electric MIG Welders
If there’s one thing that most people agree on, it’s that work in the heavy industry is not easy. It makes demands on the skilled tradesmen both physically and mentally, and it takes a toll on the equipment that’s being used as well. Both people and gear are expected to work under some tough conditions, without compromising on safety, or quality while meeting the deadlines and goals that a project needs to hold in order to coordinate towards eventual completion.
One of the things that are the hallmark of good work is efficiency. And waste can come in a lot of forms. It’s possible to work wastefully, doing things in such a manner that it takes longer to complete, or uses more resources than it needs to. But it’s also possible to be wasteful with equipment and gear, taking things that only need a little bit of attention to get them working again and putting them out to pasture. Factory reconditioning, for something like the Lincoln 140T MIG welder, is a good example getting more value.
Lincoln U2688-2 "Factory Reconditioned" 140T Mig Welder Is About Value
Lincoln Electric has over a century of work put into the heavy industries of America. It’s because of Lincoln that techniques like the ductile welding came into practice in the industry. Over the decades, Lincoln has worked hard to continually improve itself, its products and the way that America works when there’s a job to be done.
These days, Lincoln is a respected, global player, continuing to innovate on products. At the same time, some of those products, even after heavy usage, don’t have to be retired or sent off to the scrapyard. Making the most of what you’ve got is a great American tradition, and when you start off with a quality foundation, like a Lincoln product, it’s easy to get more value out of it. A factory reconditioned Lincoln 140T MIG welder is one of those times when you can.
Lincoln "Factory Reconditioned" 140T Mig Welder: Used Doesn’t Mean Bad
We have factory reconditioned Lincoln U2688 2 140T MIG welders available at a special price. Make no mistake, these are not brand new models fresh off the production floor, but they have been repaired, inspected and are ready to go again for whatever jobs you may have in mind.
The 140T MIG welder is an excellent piece of equipment for either solid MIG wire, or flux cored wire. It has a 30-140 amp DC output range, making it pretty versatile for a range of different tasks. It uses a brass-to-brass gun connection for improved conductivity, and a protected circuit board that is sealed against the environment and is in a rigid plastic tray for increased shock resistance. The welder comes with nozzles, tips and a welding gun, as well as numerous other accessories to make sure you’re ready to go straight out of the box.
Fair Prices, Fast Shipping
If you want to enjoy the value owning a factory reconditioned Lincoln 140T TIG welder, we can send your order to any address within the continental United States. It will arrive in top, working condition, and the wait will be minimal thanks the alliances we have with experienced, professional shipping partners. For even more added value, we’ll be sending you your order free of shipping and handling charges. It’s our show of thanks for your support of a hardworking, American business.