ESAB Rebel EMP 285ic Multiprocess Welder w/Cart

$ 5,199.00
By ESAB

Size

ESAB Rebel EMP 285ic Multiprocess Welder w/Cart

 

 

The ESAB Rebel EMP 285ic is boasting with a 5 to 300 amp range. This machine has the power to do it all! Not only can this machine run MIG, Stick, and TIG processes, but it can do so with the best of them, including single process machines! If ESAB didn't have your attention before, you might want to take a look now. 

 

Features:

 

True Multi-Process 

  • Excellent performance on MIG, Flux-Cored, TIG and Stick industrial applications 

 

Power to Perform

  • 285A @ for 1-Phase Model and 285A for 3-Phase model
  • You will have the confidence to full range of .045" (1.2 mm) wire 
  • Short arc and spray transfer with increased deposition rates and productivity on smaller diameter wires such as .030" (0.8 mm) and .035" (0.9 mm)

 

4 Roll Drive System 

  • Weld up to .052" (1.4 mm) solid wire and up to 1/16" (1.6 mm) cored wire
  • Weld up to 5/32" (4.0 mm) and TIG rods up to 3/16" (5.0 mm) 

 

Unmatched Portability/Mobility

  • Weighing in at 70 lbs with multi-voltage, multi-phase capable capable and 4 handle roll cage
  • Detach the Rebel EMP 285ic from its cart and tackle any job around the shop or out at the job site 

 

TFT Multilingual Display 

  • Packed full of features, Rebel EMP 285ic has 4 programable memory locations for each process, multi-language selection, trim adjustment, inductance control, pre/post flow control and spot weld setting 
  • Gives you the ability to fine tune your welds for the most optimal performance

 

sMIG Technology 

  • Innovative "Smart-MIG" feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc
  • Set wire diameter and plate thickness and you are ready to weld 

 

Included:

 

  • Power Supply 
  • Tweco Spray Master Velocity MIG Gun 
  • Electrode Holder
  • Atom Arc 7018 Electrodes
  • Victor Argon Flowmeter Regulator
  • 12.5 ft (3.8 m) Hose
  • Return Clamp with Leads
  • Drive Rolls & Contact Tips
  • .035" (0.9 mm) Wire
  • Operators Manual 

 

Specifications:

 

MAXIMUM OUTPUT
  • 300A / 34V (1ph)
  • 305A / 34V (3ph)
PRIMARY VOLTAGE
  • 120 - 240 VAC (1ph)
  • 460 - 575 VAC (3ph)
MIG WELDING OUTPUT
  • 285A / 28V @ 40% Duty Cycle (1ph)
  • 220A / 25V @ 60% Duty Cycle (1ph)
  • 160A / 22V @ 100% Duty Cycle (1ph)
  • 285A / 28V @ 50% Duty Cycle (3ph)
  • 265A / 27V @ 60% Duty Cycle (3ph)
  • 200A / 24V @ 100% Duty Cycle (3ph)
STICK WELDING OUTPUT
  • 260A / 30V @ 40% Duty Cycle (1ph)
  • 210A / 28V @ 60% Duty Cycle (1ph)
  • 135A /  25V @ 100% Duty Cycle (1ph)
  • 285A / 31V @ 50% Duty Cycle (3ph)
  • 255A / 30V @ 60% Duty Cycle (3ph)
  • 180A / 27V @ 100% Duty Cycle (3ph)
TIG WELDING OUTPUT
  • 285A / 21V @ 40% Duty Cycle (1ph)
  • 240A / 19V @ 60% Duty Cycle (1ph)
  • 185A / 17V @ 100% Duty Cycle (1ph)
  • 285A / 21V @ 50% Duty Cycle (3ph)
  • 265A / 21V @ 60% Duty Cycle (3ph)
  • 220A / 19V @ 100% Duty Cycle (3ph)
CURRENT RANGE
  • 5 - 300 A (1ph)
  • 5 - 350 A (3ph)
MIG WELDING VOLTAGE RANGE 12 - 34 V
WIRE FEED SPEED RANGE  60 - 800 ipm (1.5 - 20.3 m/min)
NOMINAL OCV VOLT/DC 68 VDC
MAXIMUM PLATE THICKNESS 1.2" (13 mm)
WIRE DIAMETER RANGE
  • Mild Steel: .023" - .052" (0.6 - 1.3 mm)
  • Stainless Steel: .030" - .052" (0.8 - 1.3 mm)
  • Aluminum: .030" - 1/16" (0.8 - 1.6 mm)
  • Flux Cored: .030" - 1/16" (0.8 - 1.6 mm)
WIRE SPOOL SIZE  4, 8 & 12 (100, 200 & 300 mm)
APPROVALS
  • CSA E60974-1-00
  • UL60974-1
  • IEC 60974-1
PROTECTION CLASS IP23S
POWER SOURCE DIMENSIONS 26.5" x 11.5" x 19.5" (673 x 292 x 495 mm)
POWER SOURCE WEIGHT 70 lbs (31.7 kg)
SUPPLY VOLTAGE RANGE  90 - 270 VAC
SUPPLY FREQUENCY 50/60 Hz
NUMBER OF PHASES 1-Phase or 3-Phase
SUPPLY PLUG
  • NEMA 6-50P (230V)
  • No plug for 3-Phase
LEAD CORD LENGTH 10 ft (3 m)

 

 

Accessories:

 

PART NUMBER  PART NAME
0558102493 ESAB TXH 201 TIG Torch Outfit for Rebel 235
1027-1398 Tweco 200 Amp Spool Gun - Tweco® Style, 12 ft
1023-1277 Tweco Spray Master® V250 V-Series MIG Gun - Tweco® Style, 12 ft
1036-1756 Tweco Spray Master® V350 V-Series MIG Gun - Tweco® Style, 15 ft
21155 ESAB .023" - .030" V-Groove Drive Roll
21156 ESAB .035" - .045" V-Groove Drive Roll
21157 ESAB .052" - 1/16" V-Groove Dril Roll
21160 ESAB .030" - .035" V-Knurled Drive Roll
21161 ESAB .040" - 1/16" V-Knurled Drive Roll
21159 ESAB 3/64" - 1/16" U-Groove Drive Roll
0558001758 ESAB Inlet Guide

 

Videos: