FREE SHIPPING ON ORDERS OVER $100
  • Lincoln K2808-1 Tomahawk 1000 Plasma Cutter (1 Each)
  • Lincoln K2808-1 Tomahawk® 1000 Plasma Cutter with Hand Torch

Lincoln K2808-1 Tomahawk® 1000 Plasma Cutter with Hand Torch

$ 2,990.00

Quantity


Pin It

Lincoln K2808-1 Tomahawk® 1000 Plasma Cutter with Hand Torch

 

 

PLASMA CUTTING - ANYWHERE, ANYTIME


The Tomahawk® 1000 plasma cutting system is portable enough to use on the jobsite and rugged enough to use on up to one inch material in a production environment. Hook up the compressed air, grab the torch and start cutting.

 

Input Power:

  • 208-575/1/3/50/60

 

Processes:

  • Plasma cutting for mild steel, stainless steel, aluminum, brass, copper

 

 

POWERCONNECT® TECHNOLGOY

  • Automatically senses and adjusts to input power for a range of 200 up to 600 volts, single or three phase, 50 or 60 hertz
  • Cutting output remains constant throughout the entire input voltage range

CONTINUOUS OUTPUT CONTROL

  • Focus the arc for different material thickness


TORCH START™ SYSTEM

  • Reliable plasma arc initiation without high frequency

 

FRONT PANEL PURGE CONTROL

  • Makes it easy to set the air flow rate without initiating the plasma arc

 

COOL OPERATION, LONG CONSUMABLE LIFE

  • New electrode and nozzle design save you money in the long run

 

ADDED SAFETY

  • Lincoln's Parts-in-Place system detects correct installation of consumables and torch

 

ENGINE DRIVE COMPATIBLE

  • Select a Lincoln Electric Ranger® or Vantage® to power your Tomahawk® in remote locations

 

 

INPUT POWER 208-575/1/3/50/60
RATED OUTPUT 40A@96V 100%
60A@104V 50%
INPUT CURRENT 37.8A
OUTPUT RANGE 20-60A
DIMENSIONS (H X W X D) 15.2" x 8.5" x 22.1" (385 x 215 x 561 mm)
NET WEIGHT 70 lbs (31.75 kg)
PILOT CURRENT 20A
AIR PRESSURE REQUIRED 87 - 109 psi
(6 - 7.5 bar)
AIR FLOW RATE 80 psi @ 275 SCFH
5.5 Bar @ 130 +- 20% Liters / min. 


 

 

  • LC65 hand torch and 25 ft (7.5 m) cable with electrode, nozzle 60A, swirl ring, retaining cap, drag spacer
  • Air regulator and pressure gauge
  • Internal water separator
  • Work clamp and cable
  • Spare consumables include (2) electrodes, (2) nozzles, (1) swirl ring
  • Shoulder strap
  • Input power cord

 

View More

Lincoln K2808-1 Tomahawk Welding Keeps Evolving


The basic principles of welding go all the way back to the Bronze Age, when it was discovered that the application of enough heat to even hard metals could have a profound impact. Make any substance hot enough to reach its melting point, and, depending on your goals, you can soften the metal, to make it easier to shape and manipulate, or even cut it outright.

That principle, however timeless it is, keeps evolving with new techniques and technologies. Manipulating metals went from using simple, hot flame to using gas as the source of a torch. Then gas was eventually combined with electricity to create even more heat, and now we have new methods, like lasers and plasma to get the job done. Plasma in particular has been making a lot of advances, not just in power, but in cost, and is now more accessible than ever before, thanks to products like the Lincoln Tomahawk 1000 plasma cutter.

Lincoln Tomahawk 1000 Plasma Cutter Is Committed To Innovation


From the very beginning, Lincoln Electric has always been about bringing new advances into America’s heavy industry. It was the company’s founder, John C. Lincoln that first realized how important electrical engines would be for advanced industrial work as far back as 1885. He manufactured and sold these to the businesses and their skilled tradesmen.

Over a century later, Lincoln Electric has grown from one success to the next, and is now a multinational corporation that serves the world’s industrial needs. From electric motors to welding torches, Lincoln has been there. And now, advanced technologies like plasma cutters are lower in cost and easier to use thanks to constant research Lincoln has done to make what was once a large, expensive technology smaller, more portable and more affordable.

Tomahawk Plasma Power For Everyone


The Lincoln K2808-1 Tomahawk 1000 plasma cutter is built to bring the power, precision and speed of plasma cutting, combined with the portability of other welding techniques. For people working with up to 1” thickness in a production environment, all you need to do is hook up compressed air, get your torch and start your cutting. This is designed to work with mild steel, stainless steel, aluminum, brass and copper.

The Tomahawk has a range of safety and convenience features to make cutting even easier and safer than before. PowerConnect technology automatically senses and adjusts to input power. The TouchStart system allows for reliable plasma arc initiation without the need for high frequency. Front panel purge control means you can set the air flow rate without needing to initiate a plasma arc. There’s even increased efficiency, thanks to the new electrode and nozzle design that makes for cool operation and longer life of the equipment, meaning less cost and time spent on replenishing or replacement.

Affordable Prices, Speedy Shipping


The Tomahawk 1000 plasma cutter is a great addition to any business that wants precise, fast cutting. If it can help you, we can send your order to any address in the continental United States. It will arrive safely, ready to go, and with minimal waiting time thanks to the alliances we have with established, reputable shipping partners. You won’t even have to think about the additional cost of shipping and handling. We’ll handle that expense ourselves, as a show of thanks for your decision to support a proud, hard-working, 100% American business.
Sale

Unavailable

Sold Out